Yamaha Grizzly 125 Ribs Seat Cover

Description

Cross ribs sewn across the width of the Grizzly 125 seat: besides the classic motocross look, each one works as a bracing point when the ground tilts or you pull away with a load. The fabric is 1.2 mm (0.05 in) non-slip gripper material over a waterproof polyester backing, with double perimeter stitching to take sun, rain and the hose. The pattern comes off the original Grizzly 125 seat, CNC cut and hand sewn, so it sits flat with no wrinkles or slack. Choose from the color combinations shown in the selector. Built to order in Buenos Aires in 48 hours and fitted by you in 15 to 20 minutes with a staple gun, screwdriver, pliers and 3/4 in staples.