Corven Hunter 150 Series Seat Cover

Description

If you want the Hunter 150 to look different without leaving the factory line, Series is the way: laser etching on the top section, the bike brand’s logo printed on, and a soft inner support that damps vibration around town. All of it sits on the HF base, 1.2 mm (0.05 in) gripper fabric with high-frequency embossing that holds better than plain material. The polyester base is waterproof and the perimeter is double stitched. The pattern is taken from the Corven Hunter 150’s original seat, so it fits with no wrinkles or excess. Made to order in Buenos Aires in 48 hours; you install it in 15 to 20 minutes with a staple gun.