Motomel 250 S6 Series Seat Cover

Description

One detail changes the face of a Motomel 250 S6 without touching anything else: the seat. The Series starts from the HF base, 1.2 mm (0.05 in) gripper fabric with high-frequency embossing, and adds laser etching on the upper surface, a printed Motomel logo and a soft inner support that damps vibration on long highway stretches. The finish reads factory, with noticeably more grip than the stock upholstery. Polyester base that water cannot pass through, double perimeter stitching, and a pattern taken from the 250 S6 original seat so it fits with no wrinkles. Made to order in Buenos Aires in 48 hours; you staple it on in 15 to 20 minutes.